Product introduction
Heat pump device consists of compressor, electronic expansion valve, dry filter, four-way valve, evaporator, casing condenser, fan and other major components, it adopts inverse Carnot principle, the compressor from the evaporator inhalation of low temperature and low pressure air Refrigerant, through the work of the refrigerant compressed into high temperature and high pressure air, high temperature and high pressure air into the condenser and air exchange heat, condensed into a cryogenic liquid in the condenser and release a lot of heat, the material absorbs its release of energy through the hot air circulation strong row of its moisture to achieve the purpose of drying materials.
The condensed high temperature and low pressure liquid is throttled and reduced by the expansion valve, and the heat of the surrounding air is absorbed by the action of the fan in the evaporator to volatilize into the low pressure air and is compressed into the compressor, so that it is circulated continuously and dry materials continuously.
Product Structure
The system makes use of the dehumidification heat pump to carry out the sludge through hot-air recycling, condensing, dehumidifying and drying. The evaporation of the sludge moisture produces latent heat. And the condensation of vapor on the heat pump requires latent heat as well. Both processes of latent heat is equal according to the law of conservation of energy. As a result, the drying process does not require additional heat capacity. The energy consumed during the process is the electricity for the input to compressor, fan, and motor.